Multi-Tech Systems CDMA Wireless Modem - Manual (Page 195)

Chapter 23 - Sprint® Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 195
Reset MIN and MDN to factory defaults +WRMM
Description: This command is used to reset MIN and MDN to their factory default values. The service
programming code must be successfully entered using the +WSPC command prior to using
the +WRMM command. The modem must be manually reset or power cycled following the
use of the +WRMM command.
Syntax:
Command syntax: +WRMM
Command Possible Responses
AT+WRMM
Note: Reset MIN and MDN to factory defaults. OK
Note: Command successful.