Write phonebook entry +cpbw – Multi-Tech Systems CDMA Wireless Modem User Manual
Page 84
Chapter 12 – Phone Book Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
84
Write Phonebook Entry +CPBW
Description: This command writes a phonebook entry to location <index> in the current phonebook
selected with the +CPBS command.
If the “MT” phonebook is selected, <index> is in the range of the combined “ME” and “SM”
phonebooks. When using auto address mode (<index> not specified in the command), the
“ME” phonebook is accessed first for an available location. If a location is not available in the
“ME” phonebook, the “SM” phonebook is accessed.
The +WSPC command must be issued with a valid SPC code value before entries in the
“EN” phonebook can be changed.
Values:
<index> Integer type value depending on the capacity of the currently selected phonebook.
<phoneNumber> Phone number is in ASCII format. Valid characters are 0-9 and *, #, -.
<TON/NPI> Type of address in integer form. The MSB of this will always be set high.
<text string>Any text string.
Note: PIN2 verification is required to do this command on the FDN. If the PIN2
authentication has been performed during the current session, the +CPBW command with
FDN is allowed.
Command
Possible Responses
AT+CPBS=”FD”
Note: Select FDN phonebook
OK
AT+CPBW=5,”8585551212”,145,”test”
Note: Write in FDN at location 5
+CME ERRO: 17
Note: PIN2 is required
AT+CPIN2?
RUIM PIN2
Note: SIM PIN2 is required
AT+CPIN2=1234
Note: Example PIN2 entered
OK
Note: PIN2 successfully entered
AT+CPBW=5,”8585551212”,145,”test”
Note: Write in FDN at location 5
OK
Note: Write in FDN successful
Syntax:
Command syntax: AT+CPBW=<index>,”<phoneNumber>”,<TON/NPI number>,”<text
string>”
Command
Possible Responses
AT+CPBW=1,”6195551212”,145,”test1”
OK
Note: Data stored in location 1.
AT+CPBW=2
Note: Erase location 2
OK
AT+CPBW=1,”8585551212”,145,”test1”
Note: Location 1 overwritten
OK
AT+CPBW=80,”8585551212”,145,”test80
Note: Error left off trailing quotes
ERROR
AT+CPBW=,”8585551212”,145,”test”
Note: Write to the first open location
OK
AT+CPBW=,”8585551212”,145,”FullBook”
Note: Phone book is full
+CME ERROR: 20
Note: Phonebook full
AT+CPBW=,”8585551212”,145,”Text is too long for this ”
Note: Write to first location that is open 24 ASCII characters
+CME ERROR: 24
Note: Text string exceed maximum character
length