Multi-Tech Systems CDMA Wireless Modem - Manual (Page 192)

Chapter 23 - Sprint® Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 192
Packet Zone Identifier +PZID
Description: This is a read-only command that displays the Packet Zone Id for the mobile IP.
Values:
Numeric value in range 0 - 255
Syntax:
Command syntax: AT+PZID
Command Possible Responses
AT+PZID
Note: Display the packet zone ID. +PZID: 1
OK
Boot URL +WBURL
Description: This command is used to read and write the boot URL value. This value is required for IOTA
connections.
Note: Following a software load, the AT+WPRR command must be used to establish the
default value.
Values:
<string>: 128 character maximum length string value.
Default: http://hcmci.iota.spcsdns.net:8080/ciip
Syntax:
Command syntax: AT+WBURL=<string>
Command Possible Responses
AT+WBURL?
Note: Display the current boot URL value. http://hcmci.iota.spcsdns.net:8080/ciip
OK
AT+WBURL=http://hcmci.iota.spcsdns.net/ciip
Note: Set the boot URL value. OK
Note: New value set.
AT+WBURL=””
Note: Set invalid URL value. +CERROR: BAD REQUEST
Note: Error message displayed.
Trusted Domain +WTDMN
Description: This command is used to read and write the trusted domain value. This value is required for
IOTA connections and is used to verify the trusted server connection.
Note: Following a software load, the AT+WPRR command must be used to establish the
default value.
Values:
<string>: 32 character maximum length string value. Default: https:.iota.spcsdns.net
Syntax:
Command syntax: AT+WTDMN=<string>
Command Possible Responses
AT+WTDMN?
Note: Display the current trusted domain value. https:.iota.spcsdns.com
OK
AT+WTDMN=https:.iota.spcsdns.net
Note: Set the trusted domain value. OK
Note: New value set.
AT+ WTDMN =””
Note: Set invalid URL value. +CERROR: BAD REQUEST
Note: Error message displayed.