Multi-Tech Systems CDMA Wireless Modem - Manual (Page 168)

Chapter 20 – Reference Information
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 168
Intermediate Result Codes
Verbose Result Code Numeric (V0 set) Description
+COLP :<number>,<type> as verbose Outgoing Call Presentation
+CR : <type> as verbose Outgoing Call report control
+ILRR: <rate> as verbose Local TA-TE data rate
CONNECT 300 10 Data connection at 300 bauds
CONNECT 1200 11 Data connection at 1200 bauds
CONNECT 1200/75 12 Data connection at 1200/75 bauds
CONNECT 2400 13 Data connection at 2400 bauds
CONNECT 4800 14 Data connection at 4800 bauds
CONNECT 9600 15 Data connection at 9600 bauds
CONNECT 14400 16 Data connection at 14400 bauds
+CSSI: <code1>[,<index>] As verbose Supplementary service notification
during a call setup
Parameters Storage
Command AT&W Enter to Save AT&F Default Values
General commands
+CSCS X X CDMA
+CMEE X X 0
+CRSL X 1
+WIND X X RUIM: 9; TE:8
Call Control Commands
%D X 0
ATS0 X X 0 no auto answer
+CICB X X 2
+CSNS X X
+VGR X X 3
+VGT X X 2
+SPEAKER X X 1
+ECHO X X 5
+SIDET X X
Network Commands
+COPS X X
(n,0 mode) 0,0
+CREG X X 0
SMS Commands
+CSDH X X 0
+WUSS X 0
+WSCL X X RUIM: 6,4
Supplementary Service Commands
+CLIP X X 1
Data Commands
+CRC X X 0
+DS X X
+DR X X 0
Fax Class 2 Commands
+FCQ X X
+FCR X X
+IPR X 115200
+ICF X 3,3
+IFC X 2,2
V24-V25 Commands
E X 1
&C X 2
&D X 2
Phonebook
+WAIP X 1