Cellular result codes +crc, Dte-dce local rate reporting +ilrr – Multi-Tech Systems CDMA Wireless Modem User Manual
Page 73
Chapter 10 – Data Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
73
Cellular Result Codes +CRC
Description: This command gives more detailed ring information for an incoming call. Instead of the
string “RING”, an extended string is used to indicate which type of call is ringing (e.g.
+CRING:VOICE).
These extended indications are:
+CRING:VOICE
for normal voice calls
+CRING:DATA
for all types of data calls
+CRING:FAX
for all types of fax calls
+CRING:OTAPA
for OTAPA calls
+CRING:TEST
for markov, loopback, and test calls
+CRING:UNKNOWN
for unknown/undefined calls types
Syntax:
Command syntax: AT+CRC
Command
Possible Responses
AT+CRC=0
Note: Extended reports disabled
OK
Note: Command valid
AT+CRC=1
Note: Extended reports enabled
OK
Note: Command valid
DTE-DCE Local Rate Reporting +ILRR
Description: This parameter controls whether or not the extended-format “+ILRR:<rate>” information text
is transmitted from the DCE to the DTE. Currently the product only supports 0 = OFF.
Values:
<value>
Decimal number corresponding to the selected option. Currently, only 0 is supported
(disables reporting of local port rate).
Syntax:
Command syntax: AT+ILRR=<value>
Command
Possible Responses
AT+ILRR=0
Note: Local port
rate report
disabled
OK
Note: Command valid