Multi-Tech Systems CDMA Wireless Modem - Manual (Page 163)

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 163
Set MN-HA Shared Secrets $QCMIPMHSSX
Description: This command is used to set MN-HA shared secret for the currently active profile in HEX.
Values:
<HEX> Hex value from 0 to FFFFFFFF
<Val>
0: Do not commit to NV
1: Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
the end of the following call if $QCMIPP is called.
Syntax:
Command syntax: AT$QCMIPMHSSX =<HEX>,<Val>
Command Possible Responses
AT$QCMIPMHSSX?
Note: Display the current setting $QCMIPMHSSX: Set
OK
Note: Command is valid
AT$QCMIPMHSSX=?
Note: Display the range of values $QCMIPMHSSX: (0-FFFFFFFF),(0-1)
OK
Note: Command is valid
AT$QCMIPMHSSX=FF,0
Note: Set value to 0xFF, but not commit OK
Note: Command is valid
Set MN-AAA Shared Secrets $QCMIPMASPI
Description: This command is used to set MN-AAA SPIs for the currently active profile.
Values:
<SPI> SPI value from 0 to 4294967295
<Val>
0: Do not commit to NV
1: Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted if
the modem is power cycled or if the $QCMIPP command is used.
Syntax:
Command syntax: AT$QCMIPMASPI =<SPI>,<Val>
Command Possible Responses
AT$QCMIPMASPI?
Note: Display the current setting $QCMIPMASPI: 1234,1
OK
Note: Command is valid
AT$QCMIPMASPI=?
Note: Display the range of values $QCMIPMASPI: (0-4294967295),(0-1)
OK
Note: Command is valid
AT$QCMIPMASPI=2300,0
Note: Set value to 2300, but not
commit OK
Note: Command is valid