Multi-Tech Systems CDMA Wireless Modem - Manual (Page 184)

Chapter 22 - Verizon® Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 184
Initial Programming Required +WOT0
Description: This Over-The-Air Service Provisioning (OTASP) response indicates that initial device
programming is required.
Syntax:
Response Syntax: +WOT0: “Initial programming required!”
Command Possible Responses
+WOT0: “Initial programming required!”
Programming In Progress +WOT1
Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device
programming is in progress.
Syntax:
Response Syntax: +WOT1: “Programming in progress”
Command Possible Responses
+WOT1: “Programming in progress”
Programming Successful +WOT2
Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device
programming has completed successfully. This response will be accompanied by three quick
audio tones from the speaker.
Syntax:
Response Syntax: +WOT2: “Programming Successful”
Command Possible Responses
+WOT2: “Programming Successful”
Programming Unsuccessful +WOT3
Description: This Over-The-Air Service Provisioning (OTASP) response indicates that device
programming has completed unsuccessfully. This response will be accompanied by three
quick audio tones from the speaker.
Syntax:
Response Syntax: +WOT3: “Programming Unsuccessful”
Command Possible Responses
+WOT3: “Programming Unsuccessful”
Commit Successful +WOTC
Description: This Over-The-Air Service Provisioning (OTASP) response indicates that the programmed
parameters have be successfully committed to NVRAM.
Syntax:
Response Syntax: +WOTC: “Commit Successful”
Command Possible Responses
+WOTC: “Commit Successful”