Multi-Tech Systems CDMA Wireless Modem - Manual (Page 80)

Chapter 11 – V24-V25 Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 80
Display Configuration &V
Description: This command is used to display the modem configuration. It lists all the commands
supported by the modem and their possible parameters.
Values: <num>
0: Manufacturer data
1: Not used
2: Not used
3: Software revision data
4: Not used
5: Configuration data
6: Capability data
7: Not used
Note: For the data returned by the ATI6 command, the use of the IS-707 +GCAP command
is preferred.
Syntax: Command syntax: AT&V
Command Possible Responses
AT&V
Note: Display the active parameter settings &C: 2; &D: 2; …
…
OK