Multi-Tech Systems CDMA Wireless Modem - Manual (Page 60)

Chapter 8 – Short Messages Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 60
Syntax: Command syntax: AT+CMGR=<index>
Response syntax: +CMGR: <stat> [,<oa>], <scts>, <lang>, <encod>, <priority>[,<cbn>],
<length> <CR><LF> <data> (for SMS-DELIVER only)
+CMGR: <stat> [,<da>], <dt>, <lang>, <encod>, <priority>[,<cbn>], <length> <CR><LF>
<data> (for SMS-SUBMIT only)
+CMGR: <stat>,<mr>,<scts>,<dt>,<st> (for SMS-STATUS-REPORT only)
Command Possible Responses
+CMTI: “MT”,1
Note: New message received
AT+CMGR=1
Note: Read the message +CMGR: “REC UNREAD”,”8585551212”,
”98/10/01,18 :22
:11+00”,1,2,0,”8585550000”,9<CR><LF>
ABCdefGHI
OK
AT+CMGR=1
Note: Read the message again +CMGR: “REC READ”,”8585551212”, ”98/10/01,18
:22 :11”,1,2,0,”8585550000”,9<CR><LF>
ABCdefGHI
OK
Note: Message is read now
AT+CMGR=2
Note: Read at a wrong index +CMS ERROR: 321
Note: Error : invalid index
AT+CPMS=”SR”;+CNMI=,,,2
Reset to text mode, set read memory
to “SR”, and allow storage of further
SMS Status Report into “SR” memory +CPMS:0,10,0,10
OK
AT+CMSS=3
Send an SMS previously stored +CMSS: 160
OK
+CDSI: “SR”,1
New SMS Status Report stored in “SR” memory at
index 1
AT+CMGR=1
Read the SMS Status Report +CMGR: “READ”,160,
“8585551212”,129,”01/05/31,15:15:09”,
“01/05/31,15:15:09”,0
OK