Multi-Tech Systems CDMA Wireless Modem - Manual (Page 21)

Chapter 3 – Unsolicited AT Result Codes
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 21
35: Origination already in progress
36: General Access Failure
37: Received retry order (IS-2000 only).
Syntax: Response syntax: +WEND: <reason>
Command Possible Responses
ATD18005551212;
ATH OK
+WORG:18005551212
+WCNT:3
OK
+WEND:29
Note: Call Ended with a normal release
ATD18005551212; OK
+WORG:18005551212
+WEND:22
Note: Call failed because the signal faded.
Feature Notification Message +WFNM
Description: This response displays a broadcast message that the carrier may send to all mobiles in an
emergency. This event is required for CDMA specifications.
Syntax: Response Syntax: +WFNM=”<message>”
Command Possible Responses
+WFNM=”Help, I have fallen and I can’t get up!”
Flash Indication +WFSH
Description: This response confirms that a flash has been sent to the base station. See +WFSH
command, Chapter 9, for more information on using flash commands.
Syntax: Response Syntax: +WFSH
Command Possible Responses
AT+WFSH OK
+WFSH