Multi-Tech Systems CDMA Wireless Modem - Manual (Page 143)

Chapter 17 – Extended AT Commands in IS707.3
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 143
Base Station IP Address +CBIP
Description: This read-only command is used to display the base station’s temporary IP address. The
value displayed is in standard IP address format.
Note: This command returns an IP value only during a data call when a temporary IP
address has been assigned. When not in a data call, this command returns “OK”.
Syntax: Command syntax: AT+CBIP
Command Possible Responses
AT+CBIP?
Note: Display the current setting +CBIP: 198.229.142.65
OK
Note: Command is valid
AT+CBIP?
Note: Display the current setting OK
Note: No IP address assigned.
AT+CBIP ERROR
Note: Command is not valid