Multi-Tech Systems CDMA Wireless Modem - Manual (Page 86)

Chapter 12 – Phone Book Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 86
Avoid Phonebook Init +WAIP
Description: This command controls access to the available phonebooks. If +WAIP is set to 1,
phonebook entries are not accessible. When +WAIP is set to 0, access to phonebook
entries is permitted.
Syntax: Command syntax: AT+WAIP=<mode>
Command
Possible Responses
AT+WAIP? +WAIP: 1
Note: No phonebook commands are allowed after boot. If a command is
entered it returns “+CMEE ERROR: 3”
AT+WAIP=? +WAIP: (0-1)
OK
AT+WAIP=1 OK
AT&W
Note: Save value to NV
<mode>
0: Normal operating mode. Enable.
1: No phonebook initialization. Disable.
Delete Calls From Phonebook +WDCP
Description: This command will delete all entries from a selected phonebook if it supports this feature.
Typically, +WDCP is used to delete the calls stored in LD, MC, and RC phonebooks.
Values: <call phonebook>:
LD, MC, or RC
Syntax: Command syntax: AT+WDCP=”<call phonebook>”
Command Possible Responses
AT+WDCP? +WDCP: “LD”
Note: Returns phonebook(s) that support deleting calls.
AT+WDCP=? +WDCP: (“LD”,”MC”,”RC”)
Note: Possible supported phonebooks
AT+WDCP=”LD” OK
Note: Erase call history for last dialed phone book