Multi-Tech Systems CDMA Wireless Modem - Manual (Page 176)

Chapter 22 - Verizon® Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 176
Enhanced Roaming Indication +WERI
Description: This response indicates that the enhanced roaming status has changed.
Syntax:
Response Syntax: +WERI: <indicator>, <icon image>, <icon mode>, <call prompt>,
<alert/call id>,
<chari type>, <text>
Command Possible Responses
Note: Example of acquiring service with enhanced roaming. +WERI: 69,2,0,0,4,2,”Extended Network”
+WROM:2
Note: Both +WERI and +WROM responses.
Note: Example of acquiring service without enhanced
roaming. +WROM:1
Note: No +WERI response.
<indicator>
64-93: Index number identifying the roaming indicator entry.
<icon image>
0-15: Verizon®. defined value that specifies the Icon Image that is displayed.
<icon mode>
0-3: Verizon®. defined value that specifies how the Icon Image is displayed (On, Off,
Flashing).
<call prompt>
0-3: Verizon®. defined value that identifies the Call Prompt that is displayed for each
roaming indicator. This field is set to a value of ZERO when no call prompt is used. Note
that this field is currently not implemented in the Verizon®. user interface specs. It may
be used in the future.
<alert/call id>
0-7: Verizon®. defined value that identifies the Alert Sound that is used for the indicator.
The value in this field reflects the ID of the Alert Sound that the mobile annunciates to
the end user.
<chari type>
0-31: Character Encoding Type (Ref TSB58E table 9.1-1). Identifies the character code
table used for the <text> field. (Usually set to 2.)
Type Bit Length Character Encoding
0 8 Octet, unspecified
1 see IS-91 IS-91 Extended Protocol Message
2 7 7-bit ASCII (ANSI x3.4)
3 7 IA5 (Table 11 of ITU-T T.50)
4 16 UNICODE (ISO/IEC 10646-1:1993)
5 8 or 16 Shift-JIS
6 8 or 16 Korean (KS x 1001:1998)
7 8 Latin/Hebrew (ISO 8859-8:1988)
8 8 Latin (ISO 8859-8:1988)
9 7 GSM 7-bit default alphabet
10-31 x Reserved
<text>
Verizon®. defined variable length field that contains the text data used for the banner.
The text is in the format specified in the Character Encoding Type. The text field is
limited to a 32 character maximum length.