Samsung HMX-H1062SP - Manual (Page 97)

English _87
Auto Power Off
You can set the HD camcorder to automatically turn off when there is no operation for 5 minutes.
Settings Contents
On-screen
display
Off The HD camcorder does not turn off automatically. None
5 Min
For power saving purposes, the HD camcorder will automatically turn off if there is no
operation for 5 minutes.
None
Auto Power Off does not work in the following situations:
• When a USB cable is connected.
• When the HD Camcorder is connected to the AC adapter.
• While the Quick On STBY function is in operation.
• While the Demo function is in operation.
• While in recording, playing (except pause), Photo slide show.
Quick On STBY
When are going to record frequently for an extended time, use the Quick On STBY function. In standby mode,
closing the LCD screen will commence the Quick On STBY mode to reduce energy consumption. Once you are
ready to record again, this function enables to the camcorder to come on quickly from the power saving mode.
Settings Contents
On-screen
display
Off Without entering Quick On STBY mode, the power turns off. -
5 Min After staying in Quick On STBY mode for 5 minutes, the power turns off. -
10 Min After staying in Quick On STBY mode for 10 minutes, the power turns off. -
20 Min After staying in Quick On STBY mode for 20 minutes, the power turns off. -
• When entering Quick On STBY mode, the Mode indicator blinks.
• After the time is set in “Quick On STBY”, the power is off automatically.
• Turning off the camcorder after use is always recommended to reduce the energy consumption, however,
you can effectively use the Quick On STBY function for the frequent shooting conditions in the specified time
schedule.
• The Quick On STBY mode is not available in the following conditions: The Quick On STBY mode is not available in the following conditions: The Quick On STBY mode is not available in the following conditions:
-
When the LCD screen is open. When the LCD screen is open. When the LCD screen is open.
- When a video cable (HDMI, Component/AV) or the USB cable is connected to the camcorder. When a video cable (HDMI, Component/AV) or the USB cable is connected to the camcorder. When a video cable (HDMI, Component/AV) or the USB cable is connected to the camcorder.
- When operating the buttons on the camcorder. When operating the buttons on the camcorder. When operating the buttons on the camcorder.
- If the LCD screen was not closed in the video standby mode. If the LCD screen was not closed in the video standby mode. If the LCD screen was not closed in the video standby mode.