IAI America XSEL-S - Manual (Page 26)

18
3) Status LED Display 1·······[Refer to Chapter 7]
This shows the current condition of the power. � : Illuminating, × : OFF, � : Flashing
Name Lamp
condition
Color Description
� Green Power ON PWR
× - Power OFF
� Orange Internal power
supply error
PSE
× - Internal power in
normal condition
� Orange � Error in mounted
PIO board
� System
abnormality
ALM (Note 1)
× - System Normal
� Orange � Reduction in
number of
stations
� IA Net
communication
error
C-ERR
× - IA Net
communication in
normal condition
� Green IA Net
communication in
normal condition
with connected
controllers
LINK
× - Communication not
established with
connected
controllers
Note 1 : To cancel the alarm, it is necessary to reboot the
extension I/O unit.
However, alarm will be generated again unless
the cause of it is removed.
5) Unit Number Setting Rotary Switch·······[Refer to 2.3.5]
Set the occupied station for the extension I/O unit.
6) DIP Switch
Put all the switches 1 to 4 OFF when using.
ON
OFF
4) Status LED Display 2
·······[Refer to Chapter 7]
This shows the current
condition of the power.
PWR
PSE
ALM
C-ERR
LINK
� � � �
� � � �
��������