IAI America XSEL-S - Manual (Page 459)

Chapter 7
Troubleshooting
7.3 Error List (MAIN application)
451
In the panel window, the error numbers follow E in the display.
Error
No.
Error name Description, action, etc.
C3A User-open communication channel
number error
The channel number of the communication channel
opened to the user is invalid.
C3B Parameter number error The parameter number is invalid.
C3C Variable number error The variable number is invalid.
C3D String number error The string number is invalid.
C3E String-variable data count
specification error
The specified number of string variables exceeds the area,
etc.
C40 String-variable delimiter
non-detection error
Delimiter cannot be detected in the string variable.
C41 String-variable copy size over error The copy size of string variable is too large.
C42 Character count non-detection
error during string processing
The character-string length is not defined in string
processing.
Execute a string processing command after defining the
length with a SLEN command.
C43 Character-string length error during
string processing
The character-string length used in string processing is
invalid.
Check the value of character-string length defined by a
SLEN command.
C45 Symbol definition table number
error
The symbol definition table number is invalid.
C46 Blank area shortage error with
source-symbol storage table
There is not enough area to store the source symbols.
Check the number of times source symbol can be used.
C47 Symbol search error Definitions are not found for the symbols used in the
program steps.
C48 SIO-message continuous
conversion error
The transmitted SIO message does not match the
message format or contains invalid data.
Check the transmitted message.
C49 SEL-SIO in-use error The SIO is being used by other interpreter task.
C4A SCIF unopen error Serial channel 1 opened to the user is not opened in the
target task.
Open the channel using an OPEN command first.
C4B Delimiter non-definition error An end character is not defined.
Set an end character using a SCHA command first.
C4E SIO invalid usage OPEN error The usage of serial channel opened to the user does not
match the parameter.
Check “I/O parameter No. 90, Usage of SIO channel
opened to user.”
C4F SEL program/source symbol
checksum error
The flash ROM data has been destroyed.
C50 Symbol definition table checksum
error
The flash ROM data has been destroyed.
C51 Position data checksum error The flash ROM data has been destroyed.
C53 Invalid flash-ROM SEL global
data/error list error
The SEL global data/error lists in the flash ROM are
invalid.
C54 Flash-ROM SEL global data/error
list duplication error
The SEL global data/error lists in the flash ROM are
duplicated.
C55 Flash-ROM erase count over error
for SEL global data/error lists
The number of time the flash ROM containing SEL global
data/error lists can be erased was exceeded.
C56 Timing limit over error (Flash ROM
erase)
Error erasing the flash ROM
C57 Flash-ROM verify error (Flash
ROM erase)
Error erasing the flash ROM
O
pe
ra
tio
n-
ca
nc
el
la
tio
n
le
ve
l e
rro
rs
C58 Flash-ROM ACK timeout error
(Flash ROM erase)
Error erasing the flash ROM