3 initialization procedure, Warning, F3 0 – Yokogawa Integral Oxygen Analyzer ZR202 User Manual
Page 127: Usr go
IM 11M13A01-04E
10-9
10. Other Functions
10.3 Initialization Procedure
Follow the table below to initialize parameters. The password for initialization is 1255.
Table 10.5 Initialization Procedure
Switch operation
Display
Description
>
ٙ
ENT
F
3
0
>
ٙ
ENT
0
000
>
ٙ
ENT
1
000
>
ٙ
ENT
1
0
00
>
ٙ
ENT
1
2
00
>
ٙ
ENT
12
0
0
>
ٙ
ENT
12
5
0
>
ٙ
ENT
125
0
>
ٙ
ENT
125
5
>
ٙ
ENT
1255
>
ٙ
ENT
USr Go
>
ٙ
ENT
USr Go
>
ٙ
ENT
F
30
T10.5E.EPS
Enter the parameter code for the item to be initialized.
The following show an example of entering "
F30.
"
(Previous needed operations are omitted.)
Touch the [
ENT
] key to switch to the password entry display.
Enter the password
1255
for initialization.
After you enter the password and then touch the [
ENT
] key, all the digits flash.
Usr Go Touch the [
ENT
] key again to display "
USER GO.
"
The symbol ( ) indicates that the key is being touched.
Light characters indicate that the digits are flashing.
Usr Go Touch the [
ENT
] key once more.
All the digits then flash for two to three seconds, and data initialization starts.
The initialization is complete, and the parameter code selection display
then appears.
WARNING
• Do not attempt to turn off the equipment power during initialization (while “USR GO”
is flashing).