Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 2)

i
IM 11M13A01-04E
IM 11M13A01-04E
2nd Edition: Aug. 2006 (YK)
All Rights Reserved, Copyright © 2005, Yokogawa Electric Corporation
Introduction
The EXAxtZR Integrated-type Explosionproof Zirconia Oxygen Analyzer has been
developed for combustion control in various industrial processes. There are several
version of this analyzer so you can select one that matches your application.
Optional accessories are also available to improve measurement accuracy and automate
calibration. An optimal control system can be realized by adding appropriate options.
This instruction manual describes almost all of the equipment related to the EXAxtZR.
You may skip any section(s) regarding equipment which is not included in your system.
Regarding the HART Communication Protocol, refer to IM 11M12A01-51E.
IM11M12A01-51E has been published as ''Model EXAxt ZR series HART protocol''.
Regarding Separate type Explosionproof Zirconia Oxygen Analyzer, refer to
IM 11M13A01-02E.
< Before using the equipment, please read any descriptions in this manual related to the
equipment and system that you have, on appropriate use and operation of the EXAxtZR. >
Models and descriptions in this manual are listed below.
Description in this manual
Model Product Name Specification Installation Operation Maintenance CMPL
ZR202S Integrated type Oxygen Analyzer ᭺ ᭺ ᭺ ᭺ ᭺
ZO21R-L Probe protector ᭺ ᭺
ZA8F Flow setting unit (for manual calibration use)
᭺ ᭺ ᭺
- Automatic Calibration unit
᭺ ᭺ ᭺ ᭺
- Calibration gas unit case (Part No. E7044KF) ᭺ ᭺
- Check valve (Part No. K9292DN, K9292DS) ᭺ ᭺
ZO21S Standard gas unit
᭺ ᭺ ᭺ ᭺
T.Int.1E CMPL: Customer Maintenance Parts List