Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 72)

IM 11M13A01-04E 7-8
7.4.5 Changing Set Values
(1) Selecting numeric values from among preset values
Switch operation Display Description
ENT
ENT
ENT
ENT
ENT
T7.4.5.1E.EPS
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
Ͼ
0
1
2
0
The set value is displayed after the parameter code selection. An example of how to
select either 0, 1, or 2 as the set value is given below.
(The currently set value is 0.)
Touch the [ ] key once to change the current value from 0 to 1.
Touch the [ ] key again to change to the numeric value 2.
If you touch the [ ] key again, the numeric value will return to 0.
Continuously touch the key, and the numeric values will change continuously.
Display the desired numeric value and touch the [ ENT ] key.
The display will then return to the parameter code selection
C 01