Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 136)

IM 11M13A01-04E 10-18
Inspection-related Items in Group G
Code Item Tuning Engineering Default
unit setting
G01 mA-output loop 4 to 20 mA 4 mA
G11 Output contact 1 0: Open Open
1: Closed
G12 Output contact 2 0: Open Open
1: Closed
G15 Automatic calibration 0: Off Off
solenoid valve (zero) 1: On
G16 Automatic calibration 0: Off Off
solenoid valve (span) 1: On
G21 Input1 contact 0: Open
1: Closed
G22 Input2 contact 0: Open
1: Closed
G30 Reset
T10.6G.EPS
10.5 Handling of the ZO21S Standard Gas Unit
WARNING
Use only non-hazardous area.
The following describe how to flow zero and span gases using the ZO21S Standard Gas
Unit. Operate the ZO21S Standard Gas Unit, for calibrating a system classified as
System 1, according to the procedures that follow.