Yokogawa Integral Oxygen Analyzer ZR202 User Manual

Page 71

Advertising
background image

IM 11M13A01-04E

7-7

7. Startup

7.4.4

Selecting Parameter Codes

Table7.4 Parameter Code

Switch operation Display

Description

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

Ͼ

ENT

T7.4.4EEPS

Ͼ

Ͼ

Ͼ

Ͼ

Ͼ

Ͼ

Ͼ

Ͼ

The symbol [ ] indicates that the key is being touched. Light characters indicate that the digits are flashing.

A01

A

0

1

A0

1

A

01

b

01

C

01

d

01

Set Value

Ͼ

Ͼ

Password has been entered and the parameter code selection display has appeared.
Character A is flashing, indicating that character A can be changed.

If you touch the [>] key once, the position of the digit that is flashing will move to the right.
his allows you to change 0.

Touch the [>] key again to move the position of the digit that is flashing to the right one m
ore digit. This enables you to change numeric character 1.

Touch the [>] key again to return the position of the digit that is flashing to A. Continuously
touch the [>] key, and the position of the digit that is flashing will move continuously to the
right.

If you touch the [ ] key once, character A will change to B.

Touch the [ ] key once to change to C.

Continuously touch the [>] key, and the value of the digit that is flashing will increase
continuously, from D to E to F to G to A. Numeric values will change from 0 to 1 to 2 to 3 …
to 8 to 9 and back to 0. However, numbers that are not present in the parameter codes, will be
skipped. Each digit is changed independently. Even though a low-order digit changes from
9 to 0, a high-order digit will not be carried.

After you select the desired character, touch the [

ENT

] key. The set data will be displayed.

Advertising