Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 116)

<10. Other Functions>
10-7
IM 11M12A01-04E
10.1.18 History of Calibration Time
The calibration-conducted dates and times for the past ten calibrations are stored in memory.
10.1.19 Time
The current date and time are displayed. These are backed up by built-in batteries, so no adjustment
is required after the power is switched off. The following shows an example of displaying June 21,
2000, 3:06 p.m.
Displayed alternately
00.06.21 15.06
F10.3E.ai
Figure 10.3 Date-and-time Display
10.1.20 Software Revision
The revision (number) of the software installed is displayed.
10.2 Operational Data Initialization
Individual set data initialization enables you to return to the default values set at the time of delivery.
There are two types of initializations: an all set-data initialization and a parameter-code-based
initialization. Table 10.4 lists the initialization items by a parameter code, and default values.
Table 10.4 Parameter Codes for Initialization
Parameter code Data to be initialized
F30 All data
F31 Data in Group A
F32 Data in Group B
F33 Data in Group C
F34 Data in Group D
F35 Data in Group E
F36 Data in Group F
CAUTION
When Data in Group F are initialized by the parameter code of 「F36」, 「F01」 and 「F02」 and 「F08」
and 「F10」 cannot be initialized.