Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 66)

<7. Startup>
7-1
IM 11M12A01-04E
7. Startup
The following describes the minimum operating requirements — from supplying power to the
converter to analog output confirmation to manual calibration.
F7.0E.ai
Place in normal operation
Check piping and
wiring connections
Set up valves
Supply power
Confirm converter
type setting
Select gas to be measured
Set output ranges
Check current loop
Check contact action
Calibrate analyzer
Set detailed data
Figure 7.1 Startup Procedure
For system tuning by HART communication, refer to the IM 11M12A01-51E ''HART Communication
Protocol''.