Notice – Yokogawa Integral Oxygen Analyzer ZR202 User Manual

Page 7

Advertising
background image

vi

IM 11M12A01-04E

<Introduction>

NOTICE

• Specification check

When the instrument arrives, unpack the package with care and check that the instrument has not

been damaged during transportation. In addition, please check that the specification matches the

order, and required accessories are not missing. Specifications can be checked by the model codes

on the nameplate. Refer to Chapter 2 specifications for the list of model codes.

• Details on operation parameters

When the EXAxt ZR Integrated type Zirconia Oxygen Analyzer arrives at the user site, it will operate

based on the operation parameters (initial data) set before shipping from the factory.
Ensure that the initial data is suitable for the operation conditions before conducting analysis.
Where necessary, set the instrument parameters for appropriate operation. For details on setting data,

refer to Chapters 7 to 10.
When user changes the operation parameter, it is recommended to note down the changed setting

data.

• How to dispose the batteries:

This is an explanation about the new EU Battery Directive (DIRECTIVE 2006/66/EC). This directive is

only valid in the EU.
Batteries are included in this product. Batteries incorporated into this product cannot be removed by

yourself. Dispose them together with this product.
When you dispose this product in the EU, contact your local Yokogawa Europe B.V.office. Do not

dispose them as domestic household waste.

Battery type: silver oxide battery

Notice:
The symbol (see above) means they shall be sorted out and collected as ordained in ANNEX II in

DIRECTIVE 2006/66/EC

Advertising