Yokogawa Integral Oxygen Analyzer ZR202 - Manual (Page 157)

ii
IM 11M12A01-04E
 If you want have more information about Yokogawa products, you can visit
Yokogawa’s home page at the following website.
Home page: http://www.yokogawa.com/an/

Written by Environmental & Analytical Products PMK Dept.
IA Div., Product Business Center
Yokogawa Electric Corporation
 Published by Yokogawa Electric Corporation
2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750, JAPAN
 Printed by KOHOKU PUBLISHING & PRINTING INC.
6th Sep.2006
Revised Section
2.4.5 "Air Set," Part No. K9473XH or K9473XJ, Standard Specification: Changed descriptions
partly;
"Air Set,"Part No. G7004XF or K9473XG, Standard Specification: Changed descriptions
partly;
2.4.7 "Cylinder Regulator Valve (Part No. G7013XF or G7014XF)", Standard Specifications;
Changed descriptions partly and drawing;
5.3 "Wiring Power and Ground Terminals": Added description in Figure 5.5;
5.3.2 "Wiring for Ground Terminals": Added item (4);
7.4.5 "Changing Set Values": Changed description in table (1);
7.9.2 "Checking Calibration Contact Output": Changed description in table 7.10;
8.3.2 "Preference Order of Output Hold Value": Deleted "or blow-back";
8.3.3 "Output Hold Setting": Table 8.5, Parameter code C06, "maintenance" should read
"calibration";
8.3.4 "Default Values": Table 8.6, Deleted "or blow-back";
8.5.1 "Output Contact": Made some corrections;
8.5.2 "Setting Output Contact":
Table 8.10, Changed descriptions;
WARNING: Deleted second warning;
9.2.2.2 "Semi-automatic Calibration": Table 9.3, Added note;
10.4 Table 10.6, Contact-related Items in Group E. Deleted some codes;
12.2.1 "What is an Alarm?": Table 12.2, Added Alarms 11 and 13;
12.2.2.2 Alarm 6: Changed descriptions;
12.2.2.3Alarm 7: Changed descriptions;
• p. 12-7 and 12-8,
Added Sections 12.2.2.6 and 12.2.2.7;
• CMPL Changed part numbers of Items 4, 12 and 13;
2.1.2 "ZR202G Integrated type Oxygen Analyzer" Safety and EMC conforming standard: Added
Caution.
2.1.2 "ZR202G Integrated type Oxygen Analyzer" Model and Codes: Added Note.
8.3 "Output Hold Setting," "Table 8.4 Analog Output Hold Setting": Added Note.
8.3.3 "Output Hold Setting," "Table 8.5 Parameter Codes for Output Holding": Added Note.
10.4 "Reset," "Table Output-related Items in Group C": Added Note.
7th March 2012
Revised and Corrected over all