Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 109)

<4. Display and Operations while Connected to GC8000>
4-62
IM 11B06C01-01E
4.6 Analyzer Configuration Window
The Analyzer Configuration Window is a window displaying the GCM or SYS configuration of the
connected GC8000, the equipment configuration of streams, valves, detectors, etc., and a list of
equipment statuses.
This window is for display only. It is not possible to operate any equipment from this window.
The Analyzer Configuration Window consists of two windows: the GCM Map and Stream Map
Windows. The display can be switched by selecting the corresponding tab.
l GCM Map Window
The GCM Map Window shows the following information:
• Number of GCMs set to the GC8000
• SYS numbers set to THE GCM
• Number of isothermal ovens in the GC8000 and their ON/OFF statuses
• Valve settings and their ON/OFF statuses
• Types of detectors (TCD/FID/FID-MC/FPD)
• Presence/absence of EPCs (Carrier n-1 to n-2 and Utility n-1 to n-4; “n” stands for an oven
number)
• Presence/absence of a hydrogen limiter and its ON/OFF status
• Presence/absence of stream valves and their statuses (stream 1 to 31 or OFF)
• Presence/absence of ATM balanced valves and their ON/OFF statuses
• Stream valves and ATM balanced valves set to THE GCM
• Valves and detectors set to SYS
The following shows an example display of the GCM Map Window:
Figure 4.76 GCM: 6, SYS: 6, detector: 6
l Stream Map Window
The Stream Map Window displays a list of GCM numbers assigned to streams (1 to 31).
5th Edition : Nov. 16, 2011-00