Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 51)

<4. Display and Operations while Connected to GC8000>
4-4
IM 11B06C01-01E
4.2.1 Toolbar
The toolbar consists of the toolbar buttons and the text window to indicate the ASET status.
Window Display button
Analyzer Operation window
Analysis Results windows
Chromatogram window
Alarm windows
Analyzer Status window
Change GCM
No. button
Change User
Level button
GC8000 Alarm
GCM No.
User Level Change All VGC
Operation Mode button
Help button
Figure 4.3 Detailed explanation of toolbar
Table List of each element functions
Button/Display Function and Display Information
Change User Level button Displays the Change User Level dialog box.
Use this button to change the user level (A, B, C, C+, or D).
Window Display button Displays the relevant window. If a window cannot be displayed, its button is grayed
out.
Change GCM No. button Displays the Change GCM Number dialog box. Use this button to change the
active GCM.
Change All GCM
Operation Mode button
Displays the Change All GCM Operation Mode dialog box.
This button changes the operation mode of all GCMs of the analyzer
simultaneously.
Help button Displays a Help window.
GC8000 Alarm Displays the alarm status of the entire GC8000. The most serious alarm status
level of each GCM is indicated.
l Green: No alarm
l Yellow: Level-2 alarm has occurred.
l Red: Level-1 alarm has occurred.
The alarms have the following severity levels. Level 1 is the highest level of
severity. Level 1 → Level 2 → (Level 3) → No alarm
GCM# Indicates the active GCM number.
This is empty (deselected) when this window is opened.
User Level Displays the currently set user level.
4.2.2 GCM Status Display Area
The GCM Status Display area shows each GCM status of the GC8000. The number of display
areas depends on the GCM count (1 to 6) held by the GC8000.
GCM Alarm Status
GCM No.
Operation
Mode
Measurement Status System No. Elapsed time/System
Analysis cycle
Elapsed time
bar graph Stream No.
Measurement status
Method No.
Changed Operation Mode Number
Display Analysis
Result button
Figure 4.4 Detailed description of GCM Status Display area
5th Edition : Nov. 16, 2011-00