Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 45)

<3. Overview Window>
3-17
IM 11B06C01-01E
(4) Click the OK button.
This completes the downloading process.
• If you wish to interrupt the downloading of setting parameters, click on the Interrupt
command in the File menu. For the Interrupt command, see the previous HELP ! .
3.8 Resetting Analyzers
You can soft-reset an analyzer.
Before conducting a reset, you need to specify the ID number of the analyzer to reset.
CAUTION
Only level-C users can conduct a reset. Also, the operation status must be changed to “Process/
Lab - Stop.”
Performing this operation to reset an analyzer forces measurement to be interrupted. Only use
this feature if absolutely necessary.
SEE ALSO
For specifying an analyzer ID number, see section 3.6.
l Operation procedure
(1) Click on the Reset Analyzer command in the Option menu.
A dialog box appears asking whether you want to reset the analyzer.
Example: For the analyzer with ID number 1
F0329.ai
(2) Click the OK button.
A dialog box appears indicating whether the reset command was accepted.
(3) Click the OK button.
When the reset command has been accepted, individual communication with the analyzer is
disconnected and the Analyzer Operation window, Chromatogram window, Alarm window, and
Analysis Results window will automatically be closed. Communication with the Overview window
is also disconnected, but will be automatically restored after the analyzer is reset.
CAUTION
The Analyzer Reset command can be selected from the menu only when the analyzer being
connected is in Remote mode. If the analyzer is in Local mode, set the operation mode to
Remote and then choose the Reset command from the menu.
5th Edition : Nov. 16, 2011-00