Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 2)

i
IM 11B06C01-01E
Introduction
Thank you for purchasing the ASET analyzer server engineering terminal software.
The ASET analyzer server engineering terminal (hereafter called the “Engineering Terminal”) is
software which is connected by a communication circuit via an analyzer server to a plurality of
GC1000 analyzers and a personal computer, for the purpose of monitoring and maintaining the
analyzers from the personal computer.
This manual describes the basic method of operating the Engineering Terminal.
For how to operate GC1000 Mark II and PCAS, refer to their corresponding user’s manuals.
Also refer to User’s Manual of GC8000 (IM 11B08A01-01E) or Password Manual (IM 11B03A03-
07E) when the user level is changed.
l Contents of this manual
The part of this manual immediately before Chapter 1 describes the method of installing the
Engineering Terminal. Read Chapter 1 and subsequent chapters after you have installed the
Engineering Terminal. The contents of each chapter are as follows.
l Chapter 1
Describes an outline of the Engineering Terminal and also the basic operations for using the
Engineering Terminal.
l Chapter 2
Describes the method of operating the Ethernet LCD emulator.
l
Chapter 3
Describes the method of operating the Overview window.
l
Chapter 4
Describes the method of operating each window when GC8000 is connected to ASET.
l
Chapter 5
Describes the method of operating each window when the Engineering Terminal is
connected to a GC1000 Mark II.
l Chapter 6
Describes the method of operating each window when ASIU is connected to ASET.
l
Chapter 7
Describes the method of operating the alarm windows.
l
Chapter 8
Describes the method of installing the Engineering Terminal for ARCNET
l
Appendix
Gives an outline of the functions of the Engineering Terminal and also the message page.
Refer to it when you do not know the meaning of a menu item or message.
l Applicable Readers
The description of the installation method assumes that the reader has a basic knowledge of
hardware and software that is necessary for installing the Engineering Terminal. This also applies
to Chapter 1 and subsequent chapters, and to Windows.
l Information Priority
The method of operating the Engineering Terminal and also the precautions for handling it
are described in the help function (on-line manual) of the engineering terminal and also the
README.TXT file which is registered at the time of installation, in addition to this manual.
The priority sequence of the sources of this information is as follows.
(1) README.TXT file
(2) Help function (on-line manual)
(3) Operation guide (this manual)
l Contents of the Package
The contents of the package are as follows. Check the contents of your package.
• ASET installation disc
• ASET Analyzer Server User’s Manual (this manual)
• Capture It! Operation Manual (IM 11B3G1-02E)
5th Edition : Nov. 16, 2011-00 Media No. IM 11B06C01-01E 5th Edition : Nov. 2011 (YK)
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation