Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 46)

<3. Overview Window>
3-18
IM 11B06C01-01E
3.9 Displaying Other Windows
The Overview window is the basic window of the Engineering Terminal. All windows other than
the Overview window are displayed from the Overview window.
This section describes how to display windows other than the Overview window.
n Displaying Each Window
The following describes how to display each window.
CAUTION
Except for the Overview window, only windows associated with a specific analyzer can be
displayed. If you wish to change to a window corresponding to another analyzer, exit the window
you are currently in, change the analyzer ID, and then display the desired window.
TIP
• Generally, only one window can be displayed at a time; however, different types of windows, such as the
Analyzer Operation window and the Analysis Results window, can be displayed simultaneously.
l Operation procedure
Click on the desired window command in the Window menu.
• You can also conduct this operation by clicking the relevant window display button on the
toolbar.
The specified window appears.
n Redisplaying a Window
As you use a number of windows or other applications, there are instances when the window you
wish to view is hidden by other windows. The following describes how to bring a specific hidden
window to the front from the Overview window.
TIP
The Change Application command in the Control menu only allows you to display the Overview window and the
Analysis Results window.
l Operation procedure
(1) Click on the Window menu.
The windows already being displayed will have a check mark at the left of each window.
(2) Click on the command that displays the window you wish to redisplay.
The hidden window is brought to the front.
TIP
Although you cannot see which windows are already opened, the window display buttons on the toolbar also
allow you to bring a hidden window to the front.
5th Edition : Nov. 16, 2011-00