Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 130)

<5. Display and Operations while Connected to GC1000 Mark II>
5-20
IM 11B06C01-01E
F5-2-25.ai
Specifying the valve number of the valve whose ON/OFF setting you wish to change causes
the current information to appear.
(3) Change the valve’s set ON/OFF time and click the Send button. Then, a confirmation
message appears.
F5-2-26.ai
(4) Click the Yes button.
(5) A message box informing you of the completion of data transmission appears.
F5-2-27.ai
(6) Click the OK button. This completes the valve ON/OFF setting change.
n Changing Individual Peak Setting
(1) Click on the Peak command in the Set menu and then click on the command corresponding
to the information (such as Peak Name or Gate Time) you wish to change.
(2) The relevant dialog box appears. (The following shows an example of the Set Peak Name
dialog box.)
5th Edition : Nov. 16, 2011-00