Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 122)

<5. Display and Operations while Connected to GC1000 Mark II>
5-12
IM 11B06C01-01E
l Window elements (Temperature Control Unit Operation window)
F5-2-11.ai
l Contents of display
The following table lists the contents of the display. The display items differ depending on the
configuration of the temperature controllers.
Display Item Description
SV Displays the temperature controller setpoint.
PV Displays the temperature controller measured value (current temperature).
State/Remark Displays the temperature controller status and comment.
Programmed
Temperature Oven*
Displays the temperature of a dual oven type programmed temperature
oven.
Isothermal oven* Displays the temperature of a dual oven type or single oven type isothermal
oven.
LSV 1, LSV 2 * Displays a sample valve temperature.
FPD Displays FPD detector temperature for single oven type.
*: The high limit of the set temperature differs for the explosionproof type.
5.2.5 Pressure Display Window
The Pressure Display window displays EPC statuses. The data updating cycle is 1 second.
l Display procedure
(1) Move the mouse cursor over the pressure indicator area of the valve display control section
and click.
The Press. Status window appears.
Valve display control section
F5-2-12.ai
Press.
Status window
Click
Close
command
(2) To exit the Press. Status window, click on the Close command in the Control menu.
l Window elements (Press. Status window)
F5-2-13.ai
5th Edition : Nov. 16, 2011-00