Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 79)

<4. Display and Operations while Connected to GC8000>
4-32
IM 11B06C01-01E
4.3.29 Stream Sequence
To set a stream sequence, select the Stream Sequence command from the Setup menu. The Set
Stream Sequence dialog box appears.
Figure 4.36 Set Stream Sequence dialog box
In this dialog box, you can assign streams of active GCM stream sequence, and enable or
disable the sequence as follows.
(1) Select a stream sequence number (1 to 8) to set the stream sequence. The corresponding
stream sequence settings are displayed.
(2) Enable or disable the sequence. (Select the box to enable, and deselect the box to disable.)
If you deselect a box, the stream number is indicated as “****” automatically and the stream
number is no longer selectable.
(3) From the stream number combo box, you can select up to 31 stream numbers that are
being assigned to the GCM.
(4) After you have changed the settings, click the Change button. A confirmation message
asking “Are you sure you want to send the data?” is displayed in the message box. When
you respond with “Yes”, the settings are changed.
4.4 Chromatogram Window
The Chromatogram window displays chromatograms of GCM currently connected and
chromatograms stored in PCAS. It also re-integrates chromatograms.
One “online startup” Chromatogram window can be displayed and up to four “off-line startup”
Chromatogram widows can be displayed.
“Online startup”
A startup procedure in which communication with the analyzer or PCAS is possible.
Chromatograms can be acquired from the analyzer or PCAS, and re-integration results can be
transferred.
“Off-line startup”
A startup procedure in which communication with the analyzer or PCAS is not established.
Activate with clicking the icon “Chromatogram” on ASET. Only file chromatograms can be
displayed.
5th Edition : Nov. 16, 2011-00