Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 98)

<4. Display and Operations while Connected to GC8000>
4-51
IM 11B06C01-01E
4.5.1 Latest Analysis Results
When the Latest Analysis Results window starts up, the latest analysis results are displayed for
each system. The head system number belonging to GCM is displayed for the system.
Figure 4.60 Analysis Results window
l Display contents
The following list the display contents for each item.
Item Description
Concentration Indicates concentration for each peak.
Retention Time Indicates retention time (second) for each peak.
Det.# Indicates detector number (1 to 6) for each peak.
Peak
start/Retention/end
Indicates peak processing start time/retention time/end time (second) for
each peak.
Gate start/end Indicates gate start time/end time (second) for each peak.
Tracking Indicates the peak pursuing status for each peak as “standard”, “pursuit”, or
“none”.
Peak Level start/height/end Indicates the peak start level/height level/end level (mV) for each peak.
Area Indicates the integral value of the peak level (mV second) for each peak.
Shape Indicates the peak data processing status for each peak. It displays “P” for
tangent correction resetting or “H” for the perpendicular method.
Half-value Width Indicates a half-value width (second) for each peak.
Tailing Coefficient Indicates a tailing constant for each peak.
Variation Coefficient Indicates a concentration variation coefficient for each peak.
Method Indicates a concentration computation method for each peak.
l Displaying the Latest Analysis Results
1) Select Latest Analysis Results in the Window menu, or the Latest Analysis Results tab to
display the Latest Analysis window.
2) Select SYS Number Select in the Display Item menu, or the system number of the analysis
result you want to display from the system number select combo box on the toolbar.
5th Edition : Nov. 16, 2011-00