Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 26)

<2. Ethernet LCD Emulator Window>
2-6
IM 11B06C01-01E
l Operation procedure
(1) Click on the Forced Connect command in the Connect menu.
The dialog box for typing a password appears.
About the password refer to User’s Manual of GC8000 (IM 11B08A01-01E) or Password
Manual (IM 11B03A03-07E).
(2) Enter the password and click the Run button.
When a user level C password is entered, in case the number of analyzers registered is 0
or 2 or more, the dialog box of Analyzer selection (Forced connect) appears.
Here, select the analyzer to be forced-connected.
When the number of analyzers registered is 0, the analyzer is added.
When the number of analyzers registered is 1, the confirmation message (to be forced-
connected) comes up.
F0210.ai
(3) When the analyzer requested the force connection is under the connection with the other
Ethernet LCD emulator, the dialog box of the force connection appears. Confirming the IP
address which is now connecting, enter a user level C password again, then click Force
connect button.
F0211.ai
CAUTION
If another user performs forced connection during this establishment of forced connection, the
original attempt at forced connection communication will be disconnected.
5th Edition : Nov. 16, 2011-00