Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 159)

<5. Display and Operations while Connected to GC1000 Mark II>
5-49
IM 11B06C01-01E
SEE ALSO
Subsection 5.5.5 for data modification
n Closing a File (on a File Reference Window)
If a file read in a file reference window is no longer required, close it using the following
procedure:
l Operation procedure
Display the file reference window you wish to close and click on the Close command in the File
menu.
The specified file is then closed.
TIP
• If the file has been modified, a dialog box asking if you want to save the changes appears. Click the Yes If the file has been modified, a dialog box asking if you want to save the changes appears. Click the Yes
button and enter the file name in the displayed dialog box to save the data as a new file. Note that if you
click the Cancel button in the displayed dialog box, the file will be closed without saving the modified data.
F5-4-13.ai
• Only one file can be displayed in a single file reference window. Opening the next file causes the previous Only one file can be displayed in a single file reference window. Opening the next file causes the previous
file to be closed automatically.
5.4.5 Modifying and Re-saving Data
Data read in a file reference window (File Analysis Results, File Concentration Analysis History,
File Retention Time History, Laboratory Analysis Results or Calibration coefficient History
window) can also be modified. Further, modified data can be re-saved (overwritten) or saved to a
file under a different name (new save).
n Modifying Data (in a File Reference Window)
l Operation procedure
(1) Choose the cell you wish to modify in the file reference window and double click it (or press
the F2 key).
The data of the selected cell is displayed in the cell contents change window on the toolbar.
F5-4-14.ai
Cell contents
change window
5th Edition : Nov. 16, 2011-00