Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 113)

<5. Display and Operations while Connected to GC1000 Mark II>
5-3
IM 11B06C01-01E
5.1.2 Changing the Operation Mode and/or Measurement
Status
You can change the GC1000 Mark II operation mode and/or measurement status.
Before changing the operation mode or measurement status, GC1000 Mark II must be selected.
CAUTION
Only level-B or -C users can change the operation mode or operation pattern.
n Changing the Operation Mode
l Operation procedure
(1) Click on the Change Mode command in the Mode menu.
• Clicking the- button of the target analyzer in the Analyzer Status window allows you to
simultaneously specify the analyzer ID and mode change.
The dialog box for changing the operation mode of the specified analyzer appears.
F5-1-2.ai
(2) Choose a new operation mode and click the OK button.
A dialog box appears confirming whether you want to change the operation mode.
F5-1-3.ai
(3) Click the Yes button.
A dialog box appears indicating whether the change was accepted.
F5-1-4.ai
(4) Click the OK button.
5th Edition : Nov. 16, 2011-00