Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 13)

<Installing the Engineering Terminal>
4
IM 11B06C01-01E
CAUTION
Might be necessary to restart the personal computer at the end of installation.
n Changing User Account Control settings
UAC helps prevent unauthorized programs from being installed on the system silently by viruses
or malicious software. This feature is normally preferable, but in some cases, it may interfere with
system operation and settings, e.g., UAC may block installation of some applications.
UAC can be disabled at the user’s discretion. Yokogawa is not responsible for any problems that
may result from disabling UAC.
The UAC setting is enabled by default. To disable the setting, you must log on using an
administrator account. All the following steps should be done as an administrator account.
(1) Open the Control Panel and then User Accounts.
Click [Change User Account Control settings]. The [Change User Account Control settings]
dialog appears.
(2) In the [Choose when to be notified about changes to your computer], side to “Never notify”,
and then click [OK].
5th Edition : Nov. 16, 2011-00