Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 24)

<2. Ethernet LCD Emulator Window>
2-4
IM 11B06C01-01E
n Changing Analyzers
l Operation procedure
(1) Click on the Select Analyzer command in the Connect menu.
The dialog box for selecting the analyzer ID of a new analyzer to be connected appears.
F0204.ai
(2) Choose the analyzer ID of the analyzer you wish to connect to from the list.
(3) Click the Run button.
This connects communication with the selected analyzer.
n Editing the List of Analyzer IDs
The method of editing information in the List of Analyzer IDs in the Analyzer select dialog box is
as follows:
l Registration
(1) Enter the analyzer ID, tag name (if necessary), and IP address into the respective fields.
The available analyzer IDs are from 1 to 240.
(2) Click the Register button. The entered information is added to the List of Analyzer IDs.
l Editing
(1) Select the analyzer ID to be edited from the List of Analyzer IDs.
(2) Change the information in the Analyzer select dialog box.
(3) Click the Register button.
l Deletion
(1) Select the analyzer ID of the analyzers to be deleted from the analyzer list.
(2) Click the Delete button. This causes the selected analyzer ID to be deleted from the List of
Analyzer IDs.
5th Edition : Nov. 16, 2011-00