Notes on command execution, Notes on the disk label, Installing hdlm – HP Hitachi Dynamic Link Manager Software Licenses User Manual

Page 111: Preparations for a new installation of hdlm, Notes on command execution -45, Notes on the disk label -45, Installing hdlm -45, Preparations for a new installation of hdlm -45, Preparations

Advertising
background image

You can use zoning of Fibre Channel switches or storage-system's

WWN security function to separately use HBA ports. You can also use

point-to-point connections to physically separate the HBA ports.

Notes on Command Execution

When HDLM is used, you cannot specify the -r option in the drvconfig,
devlinks, disks, or devfsadm command to reconfigure the HDLM devices on

another boot disk. To reconfigure HDLM devices, you must boot them from

the applicable boot disk.

Notes on the Disk Label

Before changing a disk to be managed by HDLM to an HDLM-managed disk,

make sure that you execute the format command to add a VTOC label or EFI

label to the disk. If you attempt to use HDLM to manage a disk that does not

have such a label, the path will not come online.

Installing HDLM

When you install HDLM, Hitachi Network Objectplaza Trace Library

(HNTRLib2) will also be installed.

The file path of the integrated trace information file of Hitachi Network

Objectplaza Trace Library (HNTRLib2) is /var/opt/hitachi/HNTRLib2/
spool/hntr2n.log (n indicates a file number).

You can also perform installation when HDLM is started. For details, see

The

installhdlm Utility for Installing HDLM on page 7-33

or

installux.sh Utility for

HDLM Common Installer on page 7-44

.

Preparations for a New Installation of HDLM

This section explains how to apply patches to Solaris, back up HDLM-

managed devices, set up hardware, and set up volume management

software.

Performing Operations on Devices to Be Managed by HDLM

If any devices to be managed by HDLM are operating, you need to perform

the following procedure.

To prepare a device that is already operating:

1

.

Terminate the processes of all applications that access the device to be

managed by HDLM.

2

.

If necessary, back up the contents of the device to tape.

3

.

Collect all relevant information about the logical device file names of the

device, and internal LUNs of the LUs in the storage system. This is so that

Creating an HDLM Environment

3-45

Hitachi Dynamic Link Manager (for Solaris) User Guide

Advertising
This manual is related to the following products: