HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 364)

parameter specification. To change the status of a specific LU, use the -
lu and -pathid parameters to specify the path to the LU. To change the
status of all the paths, specify only -dfha. A regular online operation is
executed on the paths other than the P-VOL in an HAM environment.
-lu -pathid AutoPATH_ID
Specify management-target paths for each LU (P-VOL). The target LUs
are the LUs that belong to a path ID that you specify in the -pathid
AutoPATH_ID parameter.
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example
The following example shows how to place a path, whose
AutoPATH_ID is 000002, online without asking for confirmation of
command execution from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
To display the format of the online operation
-help
Displays the format of the online operation.
Example
The following example shows how to display the format of the online
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path]
{ -hba HBAPortNumber.BusNumber | -hbaid
HBA_ID } [-s]
dlnkmgr online [-path] { -cha -pathid AutoPATH_ID | -
chaid CHA_ID } [-s]
dlnkmgr online [-path] [-pathid AutoPATH_ID] [-s]
dlnkmgr online [-path] [-device SCSI_Device_Name] [-s]
dlnkmgr online [-path] -hapath [-lu -pathid AutoPATH_ID]
[-s]
dlnkmgr online [-path] -dfha [-lu -pathid AutoPATH_ID] [-
s]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
6-16
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide