HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 452)

in HDLM 04-00 and those in the newer version of HDLM, and displays the
result in the standard output. The result of the command execution is as
follows:
The following table lists and describes the items to be displayed.
Table 7-3 Information Displayed by the dlmlisthdev Utility for Assisting
HDLM Transitions
Item Explanation
OldHDevName The logical device file name (HDevName) of an HDLM device
in HDLM 04-00 is displayed. If a hyphen (-) is displayed, it
means that the corresponding HDev did not exist before the
newer version of HDLM was installed.
NewHDevName The logical device file name (HDevName) of an HDLM device
of the newly installed version of HDLM is displayed. If a
hyphen (-) is displayed, it means that the corresponding
HDev does not exist after the newer version of HDLM was
installed.
DskName Indicates the storage system name
iLU Indicates the LU number in the storage system
6
.
Register the HDLM device.
Use the list showing the correspondence between the logical device file
names of the HDLM devices in HDLM 04-00 and those in the newer
version of HDLM created in step 5 to verify the logical device file names of
the HDLM devices to be registered. After verifying the file names, if
needed, register the HDLM devices to the application. For details on how
to register, see Creating File Systems for HDLM (When Volume
Management Software Is Not Used) on page 3-156 .
Note
The file that stores the output result of the dlnkmgr command's view
-path operation must be created in a directory that is not deleted
when HDLM is removed. If not, the file will be deleted during removal.
The following are the directories that are deleted during removal.
Make sure that you do not specify any of these directories as the
output destination for the file:
/opt/DynamicLinkManager
/opt/hitachi
/var/opt/DynamicLinkManager
/var/opt/hitachi
7-22
Utility Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide