HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 122)

In this example, the shaded portion shows information for each path of
the device you are removing from HDLM management. Type in the
appropriate device number, and then type quit to end the format
command.
5
.
Insert the DVD-ROM.
After a few seconds, the DVD-ROM will be automatically mounted, and
the mount point of the DVD-ROM will be displayed in a list of files.
If the DVD-ROM cannot be automatically mounted, execute the following
command to mount the DVD-ROM:
# mount -F hsfs -o ro DVD-ROM-device-name DVD-ROM-mount-point
The following shows an example of executing the commands for mounting
the DVD-ROM:
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /vol/dev/dsk/c0t6d0/DVD-ROM-volume-name /
cdrom/cdrom0
6
.
Perform the installation.
¢
If you are not performing an unattended installation of HDLM, execute
either of the following installation commands:
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/installhdlm
¢
If you are performing an unattended installation of HDLM, set the
installation-information settings file with the -f option specified as
shown below.
When executing the installux.sh script
3-56
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide