HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 384)

To display the format of the view operation
/opt/DynamicLinkManager/bin/dlnkmgr view -help
Parameters
This section describes the parameters for the view operation, in the following
order:
To display program information on page 6-36
To display path information on page 6-43
To display LU information on page 6-57
To display HBA port information on page 6-70
To display CHA port information on page 6-71
To display corresponding information about an HDLM device, sd or ssd device,
and LDEV on page 6-72
To display view operation format on page 6-73
To display program information
-sys [-sfunc|-msrv|-adrv|-pdrv|-lic|-audlog|-lbpathusetimes|-
expathusetimes|-pstv]
Displays the HDLM program information.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify a sub-
parameter, the command displays all of the program information except
the information about the audit log data collection settings, the number of
times the same path can be used for load balancing, the number of times
the same path can be used for extended load balancing, and the value of
the display-of-the-physical-storage-system-information setting.
Table 6-11 Displayed Program Information on page 6-36 describes the
specifiable parameters, displayed information, displayed items, and a
corresponding description.
-t
Does not display the title for each information item.
Table 6-11 Displayed Program Information
Parameter
and program
information
to be
displayed
Item Description
-sfunc
Information
about the
HDLM Version HDLM version number
Service Pack
Version HDLM service pack version number. This item is blank
if no service pack is present.
6-36
Command Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide