HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 218)

the Buffer Size Per Monitoring Interval Duration on page 3-152 . The
recommend value is 4096 for collecting an integrated trace.
If you do not want to change the integrated trace file size, leave New
Size(KB) blank, type !, and then press the Enter key to return to the
Hitachi Network Objectplaza Trace Library setup menu.
3
.
Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
Changing the Number of Integrated Trace Files
To change the number of integrated trace files:
1
.
In the Hitachi Network Objectplaza Trace Library setup menu, type 2 and
then press the Enter key.
A screen to set the number of integrated trace files appears. The current
value is displayed in Current Number(KB).
2
.
Enter the desired number in New Number(KB).
The default value is 4. You can specify a value from 1 to 16. The value set
here becomes the maximum of n in /var/opt/hitachi/HNTRLib2/spool/
hntr2n.log. The recommended value for integrated trace collection is 8.
If you do not want to change the number of integrated trace files, leave
New Number(KB) blank, type !, and then press the Enter key to return
to the Hitachi Network Objectplaza Trace Library setup menu.
3
.
Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
Changing the Buffer Size Per Monitoring Interval Duration
To change the buffer size per monitoring interval:
1
.
In the Hitachi Network Objectplaza Trace Library setup menu, type 4, and
then press the Enter key.
A screen to set the buffer size appears. The current value is displayed in
Current Size(KB).
3-152
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide