HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 126)

# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4096
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Nothing is displayed for Support Cluster even if you are using cluster
software. However, the cluster-support functions are, in fact, operating
without problem.
15
.
By checking the execution results of the view operation, verify the
version of the installed HDLM.
If HDLM Version is x.x.x-xx, the installed version of HDLM is correct. The
installed version of HDLM is shown for x.x.x-xx.
16
.
By checking the execution results of the view operation, verify that the
programs are running normally.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive,
the programs are running normally.
17
.
In the environment settings files (such as .profile) for root permissions,
add /opt/DynamicLinkManager/bin to the PATH environment variable.
When the Bourne shell or Korn shell is used, add the path as shown
below:
PATH=$PATH:/opt/DynamicLinkManager/bin ; export PATH
When the C shell is used, add the path as shown below:
set path=($path /opt/DynamicLinkManager/bin)
18
.
Execute the following command to view the HDevName and iLU columns:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Check the execution results of this command to determine the
correspondence between each HDevName (the logical device file name of
3-60
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide