HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 446)

Output directory #1 Files Explanation
SC3.0
#6 (Not applicable) Sun Cluster information
collection directory
SC3.0_pkginfo.txt Package information
SC3.0_scstat-q.txt Cluster status snapshot
SC3.0_scconf-p.txt Cluster configuration
information
SC3.0_scdidadm-L.txt Mapping information
between HDLM drivers
and device IDs
SC3.0_dev_did_dsk.txt List of directories and files
in the /dev/did/dsk
directory
SC3.0_dev_did_rdsk.txt List of directories and files
in the /dev/did/rdsk
directory
etc/cluster
#6 All directories and files in
the /etc/cluster
directory
Cluster configuration
information for Sun
Cluster
#1
An output directory is created in the specified directory when you extract
the getras.tar.Z file.
#2
The value N depends on the setting in the dlmwebagent.properties file.
The default value is 2.
#3
The file might not be created depending on the device managed by HDLM.
#4
In the actual file name, a file number is appended to Trace-file-prefix
specified-in-the-Hitachi-Network-Objectplaza-Trace-Library-utility2. For
example, the default will be hntr21.log to hntr216.log. Note that the 2
following the integrated trace file prefix does not represent a file number.
#5
This setup file is for VCS version 5.0. This information is collected only if
the file exists.
#6
This information is collected only if the software for which information is
to be collected is installed.
7-16
Utility Reference
Hitachi Dynamic Link Manager (for Solaris) User Guide