HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 72)

Cluster Software Supported by HDLM
The following table lists the cluster software versions supported by HDLM
when building a cluster configuration.
Table 3-3 Supported cluster software versions
Cluster software
Supported versions
Local boot disk environment #1 Boot disk environment #2
Solaris Cluster #5 Sun Cluster 3.1, Sun Cluster 3.2,
Oracle Solaris Cluster 3.3, or
Oracle Solaris Cluster 4.0
Sun Cluster 3.1 8/05 (Update
4)
Oracle RAC #6 Oracle9i RAC, Oracle RAC 10g, or
Oracle RAC 11g
--
VCS #3 VCS5.0 #4 VCS5.0 #4
#1
An environment with a boot disk located on the host.
#2
An environment with a boot disk located in a storage system instead of in
the host.
#3
The DiskReservation agent of the VCS is not supported.
#4
You must apply MP1 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP series, Universal
Storage Platform V/VM series, or Virtual Storage Platform series storage
systems are connected in a Solaris 10 environment. Note that only the
failover and parallel service groups are supported. The hybrid service
group is not supported.
#5
Can be used when the prerequisite Sun Cluster patches are applied.
#6
The following configurations are not supported:
¢
A configuration in which Oracle RAC uses the LU that specified the EFI
label.
¢
A configuration in which Oracle RAC uses ZFS.
Volume Manager Supported by HDLM
The following shows volume managers that HDLM supports.
• When combining configurations by using SDS or SVM
SDS 4.2.1
#2 , or SVM 1.0
3-6
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide