HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 141)

cdrom/cdrom0
4
.
Perform the installation.
¢
If you are not performing an unattended installation of HDLM, execute
either of the following installation commands:
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/installhdlm
• If you are performing an unattended installation of HDLM, set the
installation-information settings file with the -f option specified as
shown below.
When executing the installux.sh script
# DVD-ROM-mount-point/installux.sh -f /any-directory/
installation-information-settings-file
When executing the installhdlm utility
# DVD-ROM-mount-point/HDLM_Solaris/installhdlm -f /any-
directory/installation-information-settings-file
If execution of the utility is completed without problems, the KAPL09211-I
message is output.
After confirming that the KAPL09211-I message has been output, execute
the following command to delete the installation-information settings file:
# rm -r /any-directory/installation-information-settings-file
If the restart key is set to n (so that the computer is not restarted) in
the installation-information settings file, go to step 7.
If the restart key is set to y (to restart the computer) in the installation-
information settings file, go to step 8.
5
.
If the license key file is not found, follow the message about a license key
displayed during installation.
If the license needs to be updated and the license key file
named /var/tmp/hdlm_license is not already saved, a message is
output asking whether a user-specified license key file has been saved.
Enter 1 if a user-specified license key file has been saved. Enter 2 to
specify a license key directly.
¢
Note that if any value other than 1 or 2 is entered three times, the
installation is stopped.
If 1 is entered, specify a user-specified license key file with the absolute
path.
¢
Note that if the wrong absolute path is entered three times, the
installation is stopped.
If 2 is entered, a message that prompts you to enter a license key is
displayed. Enter the license key.
Creating an HDLM Environment
3-75
Hitachi Dynamic Link Manager (for Solaris) User Guide