HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 230)

The shaded portion, in the next step, is contained in the /etc/vx/
vxvm.exclude file.
2
.
Make an entry for the controller of the device you wish to remove from
VxVM in the controllers section of the /etc/vx/vxvm.exclude file.
In the /etc/vx/vxvm.exclude file, write the shaded portion of the
execution result of the dlmvxexclude utility shown in step 1. The settings
will take effect when the host is restarted.
The following figure shows an example of the /etc/vx/vxvm.exclude file.
Figure 3-26 Example of a description in the /etc/vx/vxvm.exclude
(controllers section)
The shaded portion indicates the specified entry.
3
.
Execute the following command to restart the host and apply the settings.
# reboot
4
.
Execute the dlnkmgr command's view -path operation to identify the
HDLM devices that must be recognized by VxVM.
The following shows an example of executing the command:
3-164
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Solaris) User Guide